F-JHA-M3

Suitable for flow rate adjustment in semiconductor manufacturing process.

Model type: Union Elbow
Weight: 43.0g
Shipping unit: 1pc.

Resin: PFA, PTFE, and PVDF

Port size
Tube dia. (O.D x I.D): φ3mmxφ2mm

Specifications
Fluid medium: Liquid(Conditional*1)
Max. operating pressure: 0.7MPa(at 0～60℃)*2
Operating temp. range: 0～100℃

Warning
*1. Make sure to follow the instructions below when the fluid medium is water or liquid.
Surge pressure must be controlled lower than max. operating pressure when using water or liquid as a fluid medium.
Tap water in Japan free from foreign substances or contamination can be used. Carry out the evaluation under an actual operating condition for using other kind of water.
The specification above may not be applied, depending on the kind of chemicals used as fluid medium. Make sure to use PISCO products after verifying their suitability on the user side.
*2. When operating temp. exceeds 60℃, refer to the following chart ""Relation of Operating Temp. & Max. Operating Pressure""

Advantages
Suitable for flow rate adjustment in semiconductor manufacturing process.
High pull-out strength and sealability are realized.
An impact-ring holds the tube firmly.
Easy control of union nut tightening.
A click gauge is incorporated for making an easy check that the union nut is firmly tightened.