Ultraslim pressure sensor with LED display
- Super slim and light weight pressure sensor with a LED display
- Indicator font size on the LED display is 4.5mm high for better visibility
- All settings are done by 2 push buttons
- Three mounting options : Bracket, DIN rail or via screws directly
- Port selection: Single Port and Inline Port
- Port type: Female Thread (M5) and Push-In Fitting (ø1.8, 3, 4mm)
Specifications
Type test: VUS8-S(Negative Pressure Type)
Consumption Current: Max. 30mA (with all the lights on, no load on the two output points)
Fluid Medium: Air (non-corrosive)
Method of Pressure Dectection: Diffusion Semiconductor Pressure Switch
Operating Humidity Range: 35~85%RH (no cindensation)
Operating Indication: LED light up (SW1: red;Sw2: green) at the main power output ON
Operating Pressure Range: -100kPa~0kPa
Operating Temperature Range: 10~50ºC
Output Method: NPN open collector
Output Mode: Separate mode, Windows comparator mode
Output Points: 2-point output (SW1,SW2)
Power Supply: DC12~24V±10% (ripples included)
Pressure Setting Range: -99~0 counts (atkPa)
Proof Pressure: 500kPa
Protective Circuit Against Overload: None
Repetitiveness: ±0.3%F.S.
Residual Voltage: Max. 1.2V (at NPN load current: 80mA)
Respond Setting: Choose from appx. 2, 25 or 250 (msec)
Setting of Differential Response: Changeable by the hysteresis setting; 0~30 counts (equivalent to 30kPa in the case of VUS8-SR)
Storage Temperature Range: 20~70ºC (atmospheric pressure: humidity: under 65%RH)
Switch Capacity: Max. DC30V, 80mA
Thermal Characteristics: ±5%F.S. (0~50ºC, reference temerature 25ºC)
Type test: VUS8-SR(Compound Pressure Type)
Consumption Current: Max. 30mA (with all the lights on, no load on the two output points)
Fluid Medium: Air (non-corrosive)
Method of Pressure Dectection: Diffusion Semiconductor Pressure Switch
Operating Humidity Range: 35~85%RH (no cindensation)
Operating Indication: LED light up (SW1: red;Sw2: green) at the main power output ON
Operating Pressure Range: -100kPa~0kPa
Operating Temperature Range: 10~50ºC
Output Method: NPN open collector
Output Mode: Separate mode, Windows comparator mode
Output Points: 2-point output (SW1,SW2)
Power Supply: DC12~24V±10% (ripples included)
Pressure Setting Range: -99~30 counts
Proof Pressure: 1.0MPa
Protective Circuit Against Overload: None
Repetitiveness: ±0.3%F.S.
Residual Voltage: Max. 1.2V (at NPN load current: 80mA)
Respond Setting: Choose from appx. 2, 25 or 250 (msec)
Setting of Differential Response: Changeable by the hysteresis setting; 0~30 counts (equivalent to 30kPa in the case of VUS8-SR)
Storage Temperature Range: 20~70ºC (atmospheric pressure: humidity: under 65%RH)
Switch Capacity: Max. DC30V, 80mA
Thermal Characteristics: ±5%F.S. (0~50ºC, reference temerature 25ºC)
There are no products to list in this category.