Ejector for conveying particles, powder and fibers
- To convey small, irregular materials, such as particles, powder and fibers in the air current
- The suction port and the exhaust port are located in a straight line. The works sucked in from the suction port pass through the inside of the vacuum generator and go out of the exhaust port. Thus the vacuum generator enables conveyance of works through a tube.
Specifications
Type test: VRL100
Air Consumption at 73 psi (50 psi for E): 3.5 SCFM (100 L/min ANR)
Fluid Admitted: Air
Max. Diameter Conveyable: 0.14 in. (3.6 mm)
Service Pressure Range at 20ºC: 0~150 psi (0~1MPa)
Service Temperature Range: 32~140ºF (0~60ºC)
Suction Flow at 73 psi (50 psi for E): 3.5 SCFM (100 L/min ANR)
Vacuum Level at 73 psi (50 psi for E): -15.6 in.Hg (-53 kPa)
Type test: VRL200
Air Consumption at 73 psi (50 psi for E): 7.0 SCFM (200 L/min ANR)
Fluid Admitted: Air
Max. Diameter Conveyable: 0.21 in. (5.5 mm)
Service Pressure Range at 20ºC: 0~150 psi (0~1MPa)
Service Temperature Range: 32~140ºF (0~60ºC)
Suction Flow at 73 psi (50 psi for E): 7.0 SCFM (200 L/min ANR)
Vacuum Level at 73 psi (50 psi for E): -15.6 in.Hg (-53 kPa)
Type test: VRL300
Air Consumption at 73 psi (50 psi for E): 10.6 SCFM (300 L/min ANR)
Fluid Admitted: Air
Max. Diameter Conveyable: 0.27 in. (7 mm)
Service Pressure Range at 20ºC: 0~150 psi (0~1MPa)
Service Temperature Range: 32~140ºF (0~60ºC)
Suction Flow at 73 psi (50 psi for E): 10.6 SCFM (300 L/min ANR)
Vacuum Level at 73 psi (50 psi for E): -27.2 in.Hg (-92 kPa)
Type test: VRL50
Air Consumption at 73 psi (50 psi for E): 1.8 SCFM (50 L/min ANR)
Fluid Admitted: Air
Max. Diameter Conveyable: 0.09 in. (2.3 mm)
Service Pressure Range at 20ºC: 0~150 psi (0~1MPa)
Service Temperature Range: 32~140ºF (0~60ºC)
Suction Flow at 73 psi (50 psi for E): 1.8 SCFM (50 L/min ANR)
Vacuum Level at 73 psi (50 psi for E): -15.6 in.Hg (-53 kPa)