• 100% Satisfaction
  • Request for Quote

    We offer volume discounts!


Solenoid Valves SVR10

Valves are available in wide variations. 5/2: 2 types: single solenoid and double solenoid 3/2 (twin 3-ports valves): 4 types: Combination available: normally closed; normally open; A: normally closed, B: normally open; A: normally open, B: normally close. Saving in wiring is possible by D-sub connector or ribbon cable connector. The single-screw-clamp mechanism for faster and easy installation or removal of valve unit on manifold.

  • Small Body but Secure Large Flow Rate
  • Valve width .41" (10.5mm)
  • 9 Valve Selections
  • Intake / Output port size is changeable by Cartridge Fitting
  • Available from control pressure 0 psi (0MPa)


Type test: SVR10 manifold
Fluid Admitted: Air
Lubrication: Not required
Max. Cycle: 5 cycles/sec.
Max. Effect. Cross-sect. Area (P to A/B): 7.5 mm2 (Cv=0.4)
Max. Excitation Time: 50 msec.
Power Consumption: 0.7W, 1VA with LED respectively to Power Supply
Power Supply: 24VDC, 100VAC
Proof Pressure: 152 psi (1.05MPa)
Response Time: 10~15 msec.
Service Pressure Range at 20ºC: 29~102 psi (0.2~0.7MPa)
Service Temperature Range: 42~122ºF (5~50ºC)

Read More

There are no products to list in this category.