RVZ8UD

Not only source pressure, terminal pressure can be controlled. Push-lock knob for easy adjustment.

Model type: Union type with digital pressure gauge
Weight: 166.0g
Shipping unit: 1pc.

Resin: PBT
Metal: Aluminium
Seal Rubber: HNBR

Port size
Tube size: φ8mm

Specifications
Specifications of Regulator
Fluid medium: Air
Operating pressure range: -100～0kPa
Setting Pressure range: -100～-1.3kPa(*)
Max. suction flow rate: 30L/min(ANR)
Operating temp. range: 0～50℃(No freezing)

Specifications of Digital Pressure Gauge
Rated pressure range: -101～0kPa
Indicated pressure range: -101～10kPa(*1)
Proof pressure: 300kPa
Fluid medium: Air, Non-corrosive / Non-flammable gas
Battery: CR2032 Lithium battery
Battery life: About 3 years (at 5times indication/ day)
Low-power indicator: Yes
Battery replacement: Yes
Turn-on interval: Display turn off after 60sec.
Sampling rate: 2Hz(2 times / sec)
Repeatability: ≦±1% F.S. ± 1 digit
LCD display: 7 segment, 3.5 digit
Indicator accuracy: ±2% F.S. ± 1 digit or less (ambient temperature: 25±3℃)
Protective structure: IP65(*2)
Ambient temp. range: Operation: 0～50℃ Storage : -10～60℃ (No dew condensation, no freezing.)
Ambient humidity range: Operation / Storage: 35 ~ 85%RH (No dew condensation)
Vibration proof: Total amplitude 1.5mm or 100m/s2, 10Hz～55Hz～10Hz scan for 1min., 2 hours each direction X, Y, Z
Shock resistance: 100m/s2、3 times each in direction X, Y, Z
Temperature characteristics: ±2%F.S. of detected pressure (at 25℃)

Advantages
Not only source pressure, terminal pressure can be controlled. Push-lock knob for easy adjustment.
Push-lock knob for easy pressure adjustment.
Realized max. 50% of weight saving compared to conventional model.
The main body is made of resin, and aluminum is used for the metal part.
Standard product equivalent to S3 specifications.
-S3 specification is available for fields requiring "No copper-based metal material is used in airflow paths" and "Low-level Ozone resistance". The rubber material is HNBR, which has excellent ozone resistance.　(*) Gauges and sensors are excluded for S3 specifications.
The lead-out directions are free by rotating the fitting part individually.
Best suitable for the control of the source pressure. Terminal pressure also can be controlled.