RVZ8AV5B

Not only source pressure, terminal pressure can be controlled. Push-lock knob for easy adjustment.

Model type: Elbow A type with large digital pressure sensor
Weight: 170.0g
Shipping unit: 1pc.
Resin: PBT
Metal: Aluminum
Seal rubber: HNBR
No copper-based metallic material is used in flow paths
HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.

Port size
Tube size: φ8mm

Specifications
Specifications of Regulator
Fluid medium: Air
Operating pressure range: -100～100kPa
Setting Pressure range: -100～-1.3kPa(*)
Max. suction flow rate: 30L/min(ANR)
Operating temp. range: 0～50℃(No freezing)

Specifications of Pressure Sensor (Digital pressure sensor with large display)
Rated pressure range: -100.0～100kPa
Proof pressure: 300kPa
Fluid medium: Air, Non-corrosive / Non-flammable gas
Power requirements: 12～24VDC(Ripple± 10% or less）
Current consumption: 40mA or less (With no load）
Switch output Switch output: NPN open collector / PNP open collector
Switch output Max. load current: 125ｍA
Switch output Max. supply voltage: 30VDC(NPN open collector) / 24VDC(PNP open collector)
Switch output Residual voltage: 1.5V or less
Repeatability: ±0.2% F.S. ± 1 digit or less
Hysteresis One point set mode: Adjustable(*)
Hysteresis Hysteresis mode: Adjustable(*)
Hysteresis Window comparator mode: Adjustable(*)
Response time: 2.5ms or less (Chattering-proof function:25ms, 100ms, 250ms, 500ms, 1000ms, 1500ms selections)
Output short circuit protection: Yes
Digital display: 3 colors (Red, Green, Orange) indication (Sampling rate: 5times / 1sec.)
Indicator accuracy: ±2% F.S. ± 1 digit or less (at Ta=25 ±3℃)
Switch ON indicator: Orange　1 & 2 indicator
Analog output (Voltage output): Output voltage:1～5V ±2.5% F.S. or less (within rated pressure range) Linearity:±1% F. S. or less, output impedance1kΩ
Environment Protective structure: IP40
Environment Ambient temp. range: Operation:0～50ºC, Storage:-10～60ºC（No dew condensation or freezing）
Environment Ambient humidity range: Operation / Storage:35～85%RH （No dew condensation）
Environment Withstand voltage: 1000VAC in 1 min.（Between case and lead wire）
Environment Insulation resistance: 50MΩor more (500VDC ）（Between case and lead wire）
Environment Vibration proof: Total amplitude1.5mm or 100m/s2, 10Hz～150Hz～10Hz for 1min., 2 hours each direction X, Y, Z
Environment Shock resistance: 100m/s2 3 times each in direction X, Y, Z
Temperature characteristics: ±2% F.S. or less (at Ta=25ºC, at temp. range 0～ +50℃）)
Cable spec.: Oil-resistance cable (0.15mm2)

Advantages
Not only source pressure, terminal pressure can be controlled. Push-lock knob for easy adjustment.
Push-lock knob for easy pressure adjustment.
Realized max. 50% of weight saving compared to conventional model.
The main body is made of resin, and aluminum is used for the metal part.
Standard product equivalent to S3 specifications.
-S3 specification is available for fields requiring ""No copper-based metal material is used in airflow paths"" and ""Low-level Ozone resistance"". The rubber material is HNBR, which has excellent ozone resistance.　(*) Gauges and sensors are excluded for S3 specifications.
Best suitable for the control of the source pressure. Terminal pressure also can be controlled.