N-3(115V)

Very compact with a low profile! (Only 3.74”L x 1.34”W x 1.77”H)

Its compact design is ideal for confined spaces. With very accurate ion balance within ± 10V, this unit has a powerful airflow for effective cleaning (up to 87psi) with quick decay time less than 0.7 seconds (at a distance of 6” using 43.5psi).

The body of the unit is equipped with an LED indicator that communicates the device’s operating status at a glance. Incorporates a reliable high frequency piezoelectric transformer and is usable with compressed air and nitrogen gas. With the 6-terminal power harness, multiple units can be connected together using one power source and warnings can be sent to external equipment.

Includes three kinds of interchangeable nozzles for different applications. An optional flexible shower tube is available (N-2C6B) for effective countermeasure against static accumulation such as in a film winder, molding machines, hoppers, conveyers, and other applications. The easy maintenance design allows an operator to change electrode needle in seconds using electrode needle removal tool (G-7DR).

Weighs only 0.23lbs.

Includes:
N-3 Ionizer, Power Supply, 6 Connector Power Harness, Standard Nozzle (G-7SN), Flared Nozzle (N-2FN), Tube Fitting Nozzle (N-2TN), and Electrode Needle Removal Tool (G-7DR)

Features:
Very Compact / Low Profile Design - (Only 3.74” Long, 1.34” Wide, 1.77” High). Compact, lightweight plastic body incorporates mounting screw holes.  Air inlets located on both sides of the body.
LED Indicator Detects Operating Status - Part of top cover glows “GREEN” during operation and “RED” when stopped due to a malfunction.
Safety Design for H.V. Malfunction - Stops automatically in the event of a high-voltage malfunction. Device includes an alarm output terminal.
Very Accurate Ion Balance ± 10V - (6” from surface, 43.5psi, w/standard nozzle)
Connect Multiple Units Together - Power can be supplied to multiple units by daisy-chaining them together
Easy Maintenance - Electrode needles can be easily cleaned and replaced by operator using electrode needle removal tool (G-7DR).
Different Nozzles for Different Applications - Ships standard with three nozzles for use in a variety of applications. (standard, tube fitting, and flared nozzle)
Optional Shower Tube (N-2C6B) - Can be connected to a freely bendable shower tube (sold separately).
CE / RoHS Approved - Designed and manufactured in compliance with EU standards, all tests are carried out in compliance with the principles of the EMC Directive

Specifications:
Ion Generation Method: High-Voltage AC Corona Discharge (37kHz)
Discharge Voltage: AC 5.6K V(p-p)
Input Voltage: DC 24V  ±5% ripple (p-p) 10% max
Power Consumption: 90mA max
Applied Source: Clean Air: 14.5~87psi; Nitrogen Gas: 14.5~87psi
Air Consumption: 29psi
Ozone Generation: 0.05ppm or less (measured at 24")
Working Temp. Range / Working Humidity Range: 41~104°F / 35~65% RH (no dewing)
Working Temp. Range / Working Humidity Range: 32~140°F / 35~85% RH (no dewing)
Decay Time: ±1000V~±100V, within 0.7sec, 43.5psi/6" (at time of factory shipment)
Weight: 0.23 lb (106g)
Ion Balance: Within ±10V or less (at time of factory shipment)
Materials: Housing: ABS Resin
Nozzles: Polyacetal Resin; Needle Pole Electrode: Tungsten