SED-31P

With use of small Pressure Sensor, a separate display system become possible.

Model type: Pressure indicator
Weight: 65.0g
Shipping unit: 1pc.

Specifications
Power supply: 12-24VDC (Ripple±10% or less)
Current consumption: 40mA or less (No-load)
Sensor input voltage: 1～5V
Switch output (PNP open collector output): PNP 2 points output：Max. load current:125mA Max. supply voltage:24VDC Internal voltage drop:1.5V or less
Repetitiveness: ±0.1% F.S. ±1digit or less
Hysteresis: One point set mode, Hysteresis mode, Window comparator mode:Adjustable (*1,*2)
Response time: 2.5ms or less （Chattering-proof function:25ms, 100ms, 250ms, 500ms, 1000ms, 1500ms selection)
Output short circuit protection: Equipped
Digital display: Main display:2 colors (Red and Green)
Indicator accuracy: ±1% F.S. ±1digit or less (at Ta=25±3ºC)
Switch ON indicator: Orange 1 & 2 indicator
Analog output: Output voltage:1～5V ±2% F.S. or less (within rated pressure range）Linearity:± 1%F.S. or less, Output impedance:1kΩ
Protective structure: IP40
Ambient temp. range: At operation:0～50ºC, At storing:-10～60ºC (No dew condensation and no freezing)
Ambient hum. range: At operation or storing：35～85% RH (No dew condensation)
Voltage proof: 1000VAC 1min. (Between the lead wire and the case)
Insulation proof: 50MΩ or more (500VDC) (Between the lead wire and the case)
Vibration proof: Double application 1.5mm or 100m/s2, 1min. 10Hz ～55Hz～10Hz, X, Y, Z each direction 2 hours.
Shock proof: 100m/s2 X, Y, Z each direction 3times
Temperature characteristics: ±0.5% F.S. or less (at Ta=25ºC, Range 0～+50ºC)
* Hysteresis is adjustable(1～8 digits) in One point setting mode and Wind comparator mode.

Advantages
With use of small Pressure Sensor, a separate display system become possible.
30㎜ indicator of good visibility with LCD 3-color dual-display
2-color indication on Main display
Main display: Pressure value (Red or Green)
Sub display: Setting value (Orange)

Compact body size
Body size: 30mm width & 30mm height

Power consumption is 40mA.
SED-30:50mA⇒SED-31:40mA

Connection by Connector cable to the display unit. Easy attachment and detachment.

Lock function is built-in
Wrong output by misoperation can be prevented by locking function.
Key icon is displayed in operating mode.