IPC-A4(115V)

COMPACT PARTS CLEANER WITH IONIZER AND STICKY GEL INTERIOR

Compact size is ideal for dust elimination of small work material.
Transparent booth with magnifying lens for optimum workability.
Ionizing air blow can be switched between Pulse mode and Continuous mode.
Built-in sensor detects when parts are put into the booth and automatically starts ionizing blow.
Auto switch-off time is adjustable.
Dust is collected on the adhesive surface of the washable polyurethane gel sheets
With no built-in dust collector, its power consumption is less than 4% (17W) of a conventional small-sized dust collector.
Ideal for removing dust and static charge from circuit board and semiconductor devices, and for cleaning part trays and removing dust from lens and acrylic products, neutralizing static charge and eliminating dust before UV protection treatment, vapor deposition, packaging and printing process, etc.

Specifications:
Dust Collection Method; Polyurethane Gel Sheets
Applied Voltage: AC 6.0kV (p-p)
Input Voltage / Current  Consumption: DC 24V  ±5%, 700mA
Power Consumption: 17 W
Applied Fluid: 0.1 MPa to 0.3MPa (use clean air)
Air Supply Hose Diameter: 6mm x 4mm
Ionizer Blowing Modes: Continuous; High-Frequency Pulse: Cycle Length: 100msec, Pulse Width: 40msec; Low-Frequency Pulse: Cycle Length: 250msec, Pulse Width: 100msec
Off-Timer Settings: 1, 2, 5, 10, 30 seconds (set by DIP switch)
Ozone Generation: Less than 0.05ppm (measured 50mm from device)
Operating Temperature and Humidity: 5°C to 40°C, 35% to 65% RH (non-condensing)
Noise: 86.5 db (A) (o.3 MPa, Continuous mode, 1m distance in front position)
Weight: 6.0kg
Accessories: Power Supply Transformer: Input: 100 to 240VAC , Output: 24VDC; Mounting Bracket for N-2 Ionizer; Electrode needle Replacement Screwdriver