IPC-A3(115V)

COMPACT PARTS CLEANER WITH IONIZER AND STICKY GEL INTERIOR

Very Low Power Consumption
Running costs are greatly reduced as a dust collector is no longer required. Air consumption can be further reduced by using a pulse blow
Easy Maintenance
Dust is collected on a self-adhesive urethane gel sheet.Simply wash the sheet off with water to restore the adhesiveness.
Adjustable Ionizing Blow Time
Easily adjust the time to stop the ionizing blow after the sensor detects the workpiece (1/2/5/10/30 seconds)

Specifications:
Dust Collection Method: Polyurethane Gel Sheets
Applied Voltage: AC 6.0kV (p-p)
Input Voltage / Current  Consumption: DC 24V  ±5%, 700mA
Power Consumption: 17 W
Applied Fluid: 0.1 MPa to 0.3MPa (use clean air)
Air Supply Hose Diameter: 6mm x 4mm
Ionizer Blowing Modes: Continuous; High-Frequency Pulse: Cycle Length: 100msec, Pulse Width: 40msec; Low-Frequency Pulse: Cycle Length: 250msec, Pulse Width: 100msec
Off-Timer Settings: 1, 2, 5, 10, 30 seconds (set by DIP switch)
Ozone Generation: Less than 0.05ppm (measured 50mm from device)
Operating Temperature and Humidity: 5°C to 40°C, 35% to 65% RH (non-condensing)
Noise: 86.5 db (A) (o.3 MPa, Continuous mode, 1m distance in front position)
Weight: 6.0kg
Accessories: Power Supply Transformer: Input: 100 to 240VAC , Output: 24VDC; Mounting Bracket for N-2 Ionizer; Electrode needle Replacement Screwdriver