SH-40

Slim and Compact AC Pulse Ion Bars

Features include:
Pulse AC corona discharge ionizing method
Tungsten Electrode needles
The ion balance can be adjusted by varying the pulse ratio
The newly developed needle electrode socket incorporates an air purging structure which has air emission ports around the needle electrode
The opposite electrodes are incorporated in the body. This design enables to prevent particles from adhering to the outside of the body due to the induced voltage and to improve the ion generation efficiency by minimize applied voltage losses
The timer notifies when to clean needle electrodes. If a problem occurs at the high voltage output, the high voltage error lamp lights and “AL-1” appears on the display
This C series is equipped with a mode to optimally adjust the ion balance automatically according to the polarity of the charged matter
 
Multiple Bars can be Daisy-Chained

Specifications:
Applied Voltage: 5.25kVAC
Air Supply Hose Diameter: 6mm x 4mm
Air Supply: Clean, dry air or nitrogen (N2) (0.5 MPa)
Operating Range: About 2" to 79" (50mm to 2000mm) (air assist used for larger distances)
Ozone Generation: 0.005ppm or less (measured at 2" / 50mm from device ar 0.3MPa)
Working Temp. Range / Working Humidity Range: 41~131°C / 35~65% RH (no condensation, no freezing) / 5~55°C / 25~85% RH (no condensation, no freezing)