C-40(MLX)

Fast and Compact AC Pulse Ion Bars

Features include:
Pulse AC corona discharge ionizing method
Tungsten Electrode needles
The ion balance can be adjusted by varying the pulse ratio
The newly developed needle electrode socket incorporates an air purging structure which has air emission ports around the needle electrode
The opposite electrodes are incorporated in the body. This design enables to prevent particles from adhering to the outside of the body due to the induced voltage and to improve the ion generation efficiency by minimize applied voltage losses
The timer notifies when to clean needle electrodes. If a problem occurs at the high voltage output, the high voltage error lamp lights and “AL-1” appears on the display
This C series is equipped with a mode to optimally adjust the ion balance automatically according to the polarity of the charged matter
 
Multiple Bars can be Daisy-Chained

Specifications:
Ionizing Method: Pulse AC Corona discharge
Input Power Supply: 24V DC ±5% (RJ45 connector)
Air Supply Hose Diameter: 2PT 1/8, Hose Ø8mm OD x Ø6mm ID
Air Supply: Clean, dry air or nitrogen (N2) (0.3 MPa or less)
Ion balance: Within ±30V @ Distance of 39"
Alarm Output: High voltage error, needle Cleaning timer (only when set) RJ45 Connector
Operating Range: 50-2000mm
Ozone Generation: 0.05ppm or less (measured at 2" / 50mm from device ar 0.3MPa)
Working Temp./Humidity Range: 0~50°C / 35~85% RH (no dew condensation, no freezing)
Materials: Body: Flame-retardant ABS resin / Needle Electrode: Tungsten
Included Accessories: Instruction manual, (1) Remote control, (1) 5m Power cable, (2) End brackets, (1) Middle bracket (when applicable)