G2-E(115V)-KIT-B

Powerful Ionizing Air Gun with Unique Handle Grip for Upward or Downward Cable Installation Direction

Outstanding Performance: +/-10V Ion Balance
Versatile Cable Installation (Upward or Downward)
Powerful Airflow for Dust Removal
Fast Decay Time (Less than 1.0 Seconds)
Large LED Panel for Operation Status
Visible High Voltage Warning Alarm
Compact and Ultra-Lightweight
Safe 24VDC Low Voltage Circuit
Very Easy Maintenance
This revolutionary handheld ion gun is ideal for blowing away dirt or dust that adheres to part surfaces that is caused by static electricity or to remove static electricity as a preventative measure against dust accumulation.

Its uniquely designed handle has dedicated grooves in the grip which allows the wiring direction of the air hose and AC cable to be changed upward or downward according to the on-site layout. When the hose and cable are arranged in an upward position, it makes it easy to hang the G2-E from a tool balancer for a cell production table setup.

For enhanced safety, it operates on a 24VDC low voltage circuit and the piezoelectric high frequency transformer is located inside the handle. Since a high-voltage external power supply cable is not needed, there’s no need to worry about current leaks or electric shock caused by wire breakage. This compact setup saves valuable workspace and allows operators to move locations easily.

Also, this versatile unit is equipped with a large LED operating panel which is located on top of the tool making it visible to the operator during use. When the tool is turned on and operating correctly, the LED lamp lights up in blue color. If the built-in transformer detects any abnormal high voltage, it shuts down the output and the LED lamp lights up in red color to show the abnormality.

Overall, this tool is very user-friendly , has easy maintenance, and holds the CE and RoHS markings.

G2 (115V)-Kit-A includes G2 (115V) Ion Gun, downward harness, air hose, power cables, fittings, 115V power supply, and protective rubber cushion

G2 (115V)-Kit-B includes G2 (115V) Ion Gun, upward harness, air hose, power cables, fittings, 115V power supply, and protective rubber cushion

Specifications:
Model Number (EDP #): G2-E (621659)
Ionizing Method / Applied Voltage: Piezoelectric high-frequency AC corona discharge / AC 4.5kV
Rated Input Voltage: 100~240V AC (50~60Hz) 0.4V
Power Supply and Current Consumption: DC 24V  ±5% / 100mA (typ)
Ion Balance:Within ±10V (43.5psi/0.3MPa at 6"/150mm) [measured values]
Decay Time: 0.8 sec or less (43.5psi/0.3MPa at 11.8"/300mm) [measured values]
Air Pressure / Operating Fluid: 14.5psi to 87psi (0.1-0.6MPa), Clean Dry Air
Operating Range: 1.97" to 11.81" (50mm to 300mm) / Installation: Indoor, non-hazardous area
Dimensions (LxHxD): 5.8" x 6.2" x 1.7" (148 x 157 x 44mm)
Estimated Weight: 0.57 lbs (0.26kgs / 260g)
Air Supply Hose Diameter: Ø6mm Tube Fitting
Airflow: 7.06 ft3/min @ 43.5psi (200 l/min @ 0.3MPa)
Noise Level: 94dBA (43.5psi / 0.3MPa)
Ozone Production: 0.05ppm or less (measured at 1.97" / 50mm)
Working Temp Range: 41-104°F (5 - 40°C)
Working Humidity Range: 35~65% RH (non-condensing, non-freezing)
Operating / Warning Indicators: Power or Good Operating Condition (Blue LED) / High Voltage Alarm (Red LED)
Materials: Casing: Fire retardant polycarbonate and elastomer, Bail Hook: SUS, Electrode Needle: Tungsten
Approximate Cable Length(s): DC output cable 8.2ft (2.5m), AC input cable 5.9ft (1.8m)
Accessories / Optional Items: (AD24-ITC-E) 6-ft robotic AC adapter, (G7-DR) electrode needle removal tool, (G7-SC) speed controller, (G7-F) micro filter, (N-2TN) air tube nozzle
Includes: Ion Gun with Standard Nozzle, Power Supply, User's Manual
Markings: CE, RoHS
Country of Origin: Japan