KC3/8-N1-F

The image shows KC8-02 (tapered screw).

Brass is used for the release ring as well as the main body.
Ideal for piping in environments where sparks are generated or high temperatures are present.

Shape: Straight type with cover
Mass: 31.0g
Shipping Unit: 10pcs
Metal: Brass + electroless nickel
Seal Rubber: FKM

Applicable size
Tube Size: φ3/8"
Screw Size: 1/8-27NPT

Specification
Fluid used: Air, water, heat transfer oil (conditions apply*1)
Maximum Operating Pressure: 1.0MPa
Vacuum pressure used: -100kPa
Operating temperature range: 0 to 150℃ (※2) (no freezing)

Caveat
*1) When using water or heat transfer oil, be sure to observe the following conditions.
When using water or heat transfer oil, keep the surge pressure below the maximum operating pressure.
General tap water in Japan that is free of foreign objects or contaminants can be used. If using other water, please check the actual equipment for evaluation.
When using water or heat transfer oil, be sure to use the insert ring (WR).
*2) When using at temperatures above 120°C, the sealing ability of the sealock may be compromised, so be sure to use sealing tape on the threads.