• Happy Thanksgiving
  • 100% Satisfaction
    Guaranteed
  • Request for Quote

    We offer volume discounts!

PISCO QUICK-FITTINGS

Pisco Quick-Fittings

Pisco Quick-Fittings are available in many varieties, such as:

  • Standard type
  • Economy type
  • Mini-type
  • Stainless SUS304 type
  • Stainless SUS316 type
  • SUS303 Alike Type
  • PPS (chemical) type
  • PP type
  • Anti-spatter type
  • All brass type
  • Flow shut type / Stop fittings
  • Anti-static type
  • Color Cap type.

Pisco fittings are available in many shapes and sizes so they can be used for a variety of different applications. Whether you're looking for fittings that suitably interact with chemicals and other corrosive environments or something customizable, DAS Services, Inc. can help you find the perfect solution. Shop all Pisco fitting types above!

Read More
  • Standard type

    Coming in a wide variety of models, the Tube Fitting standard type is a quick-fitting joint for use in pneumatic piping.

    • Patented design of Lock-claws makes easy connection and disconnection of tubes.
    • With a thread model, the direction of the tubing can be changed freely even after installation.

    PDF CATALOG                                FIND PART#


    Type test

    Clean-room
    Fluid Admitted
    Air, Water (Conditional)
    Air
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Class 10000 or Class 1000 for down stream use
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~140ºF (0~60ºC)
    32~140ºF (0~60ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)
    -29.5in.Hg (-100kPa)


    ...
    Read More
  • All brass type

    This quick-fitting joint is highly resistant to spatters and higher temperatures.

    PDF CATALOG


    Type test

    Fluid Admitted
    Air, Water (Conditional)
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~248ºF (0~120ºC)
    Service Temperature Range: Seal Rubber Material
    HNBR: 32~212ºF (0~100ºC); FKM: 32~248ºF (0~120ºC); NBR: 32~140ºF (0~60ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)



    ...
    Read More
  • Anti spatter type

    This quick-fitting joint is highly resistant to spatters and higher temperatures.

    PDF CATALOG

    Type test

    Fluid Admitted
    Air, Water (Conditional)
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~248ºF (0~120ºC)
    Service Temperature Range: Seal Rubber Material
    HNBR: 32~212ºF (0~100ºC); FKM: 32~248ºF (0~120ºC); NBR: 32~140ºF (0~60ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)


    ...
    Read More
  • Anti static type

    Tube Fitting EG is made of electro-conductive resin.

    PDF CATALOG

    Type test
    Mini
    Standard
    Fluid Admitted
    Air
    Air, Water (Conditional)
    Remarks

    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~86psi (0~0.6Mpa)
    0~86psi (0~0.6Mpa)
    Service Temperature Range
    32~104ºF (0~40ºC)
    32~104ºF (0~40ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)
    -29.5in.Hg (-100kPa)



    ...
    Read More
  • Flow shut type / Stop fittings

    The stop mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected.

    PDF CATALOG

    Type test

    Fluid Admitted
    Air, Water (Conditional)
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~140ºF (0~60ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)



    ...
    Read More
  • Mini-type

    This quick-fitting joint series is 40% smaller than the standard type Tube Fitting.

    • The ultra-small quick-fitting joint is used in pneumatic piping.
    • Micro-fittings for 1.8mm OD tube is now available.
    • The eliptical, ultra-small release ring facilitates connecting and disconnecting the tube.

    PDF CATALOG

    Type test

    Clean-room
    Fluid Admitted
    Air
    Air
    Remarks

    Class 10000 or Class 1000 for down stream use
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~140ºF (0~60ºC)
    32~140ºF (0~60ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)
    -29.5in.Hg (-100kPa)


    ...
    Read More
  • Stainless PPS (chemical) type

    These fittings, made of all PPS (except the seals), possess excellent heat and chemical resistance and are noncombustible. The seal is made of fluorine rubber, to meet a wide variety of applications.

    • No need to worry about rust because the fitting is all resin made.
    • Non-lubricated specification is suitable for food related application.
    • The weight is about 1/3 of standard fittings.
    • Sealing materials: Fluorine, EPDM or NBR

    PDF CATALOG

    Type test

    Fluid Admitted
    Air, Water, Other (Conditional)
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~176ºF (0~80ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)


    ...
    Read More
  • Stainless SUS303 Alike Type

    All bodies are made of SUS316, which is highly resistant to corrosion, making this series suitable for not only chemical-involved applications, but also for high temperature and high pressure environments.

    PDF CATALOG

    Type test

    Fluid Admitted
    Air, Water, Other (Conditional)
    Service Pressure Range at 20ºC
    up to max. pressure of tube
    Service Temperature Range
    up to tubing spec.
    Working Vacuum
    -29.8in.Hg (-101kPa)


    ...
    Read More
  • Stainless SUS304 type

    Constructed with strengthened PBT with SUS304. Stainless steel construction is suitable for applications requiring strength or anti-chemical purposes.

    PDF CATALOG


    Type test

    Fluid Admitted
    Air, Water (Conditional)
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    Service Temperature Range
    32~140ºF (0~60ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)


    ...
    Read More
  • Stainless SUS316 type

    All SUS 316 construction and fluorine gasket makes these fittings suitable for most applications.

    PDF CATALOG


    Type test

    Fluid Admitted
    Air, Water, Other (Conditional)
    Remarks
    For water: Surge pressure must be lower than max service pressure and use of insert ring
    Service Pressure Range at 20ºC
    0~150 psi (0~1MPa)
    Service Temperature Range
    5~248ºF (-15~120ºC)
    Working Vacuum
    -29.5in.Hg (-100kPa)


    ...
    Read More
×